I firmly believe that many of my friends are very concerned about the period of use of office furniture that I just bought or is about to buy. Usually, the period of use of office furniture is related to many factors, not only related to the original office furniture itself. So how long does the office furniture last? Please follow the small series to see what happens. The following points are only for reference to the basin friends who want to master. Although office furniture does not have to be replaced often like clothes and pants, it also has a necessary lifespan, and the service life of office furniture is usually long, which is related to its materials, construction process, application methods, etc. Below, people talk about the relationship between the service life of office furniture and materials.
First, the material-grade service life of solid wood office furniture is used to make office furniture. The benefit is that it is very environmentally friendly, but its service life is a problem. Many people will say that wood furniture can be widely used in ancient times. It’s circulated, and it’s been normal for a lot of years. There is always a need to talk about it. In the old days, the wood furniture was often widely circulated. Because of the good materials, the solid wood board is also high and low. The mahogany furniture can be undoubtedly, but the usual wood is not so good. Previously, the structure did not destroy the wood, and most of today use hardware accessories, and the service life will be greatly reduced. Second, the flat material and the service life The artificial wood-based office furniture dominated by man-made plates has become a key material type in the sales market. The characteristics are relatively high density and low price. Its service life is related to external factors. Under the influence of external force and external factors, everything is normal for decades, but it is unlikely. Temperature, moisture, and force are all harmful to the board, and the service life will be harmed. Third, the steel-wood fusion material and the service life steel-wood office furniture can be said to be the office furniture with a long service life at the present stage. The steel frame structure does not say its service life for a long time, the solid wood panel control panel It also has a long service life, and it is important that the control panel can be replaced. Fourth, the maintenance of office furniture to increase the use of all furniture must be well maintained, so that the use of furniture will increase, office furniture is like this. When purchasing office furniture, the store usually presents customers with cleaning liquids and cleaning service agents. This product is not only low in the sales market, but also often does not exceed the actual maintenance effect. The following small series will give you a detailed introduction to the way in which office furniture can be maintained more effectively. 1. The placement of office furniture is also very important. It should not be placed in the sun. It is very easy to show cracks and fades due to the sun and the sun. However, the furniture can not be placed in the wet and cold indoor space, such as near the wet and cold wall, in order to prevent the wood from pre-wetting and gathering. After a long time, it is regrettable that it is very perishable, the cabinet is difficult to open, and the flat furniture is very easy to be tilted. On the side, the high-grade sofa should be placed in the cognac to prevent the internal yellow rust and damage the elasticity. Therefore, the office furniture placement point to buy home should be the indoor ventilation, so that the office furniture itself has a basic maintenance. 2. Office furniture should always pay attention to its daily cleaning. If it is cleaned and cleaned frequently, it is very easy to accumulate dust in the fine gaps. It is not only inconvenient to clean, but also harmful to the overall beauty, and the dust will promote wooden furniture. The furniture is very easy to get old. When cleaning the dust, be careful not to scrub with a wet cotton towel. It should be cleaned with a woolen bristles. If it is necessary to gently scrub with a soft, cold soft cloth, some people think that it is stronger with soap powder or soap. The surface layer of office furniture is removed, in fact, this type of organic chemical aqueous solution is apt to harm the paint color of office furniture or cause the paint to fall. People can use a soft cloth and a small amount of furniture wax or walnut oil to gently scrub along the lines. 3. When using office furniture in general, care should be taken not to allow hard lumps or sharp internal metal objects to collide to maintain the surface of the office furniture without showing defects. It is very important that some Taipan, solid wood sheet metal filing cabinets and other goods should be taken care of to prevent scratches. When the cabinet office furniture is moved, it is not necessary to pull it hard to prevent the furniture table legs from loosening and destroying. 4. The surface of the office furniture does not need to exothermic reaction cups or alkaline etched objects, so it is very easy to leave imprints that cannot be removed. In addition, it is necessary to prevent the colory liquid such as ink from scattering on the tabletop, due to wooden furniture. It is extremely absorbent, and it may not be able to be removed if it is sprinkled. Many customers will pay great attention to maintenance during the period when they just bought office furniture. They don’t want to pay attention to it for a long time. In fact, they want to keep office furniture for a long time, long-term application, and normal cleaning. Maintenance is indispensable. I firmly believe that the basin friends who read the left and right content of the article will have the necessary mastery of the use period of the different office furniture and its maintenance methods.
